Training Calendar 2020

“Intellectual growth should commence at birth and cease only at death”

-Albert Einstein

Scheduled Courses shown here - all other courses can be scheduled throughout the week depending on availability

Click on course in calendar for more information

Dec
17
Tue
Spotter Training @ H&I Safety and Training Facility
Dec 17 all-day
Spotter Training @ H&I Safety and Training Facility

RIIRTM203D – Work as a Safety Observer Spotter -SO

1. Plan and prepare to work as a safety/spotter

1.1 Access, interpret and apply relevant traffic management plan documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work requirements and coordinate activities with others
1.3 Select and wear personal protective equipment appropriate for the work activity
1.4 Identify, address and report potential risks, hazards and environmental issues and implement control measures
1.5 Identify, confirm, clarify and apply environmental protection requirements

2. Identify and manage hazards

2.1 Check working areas for vehicle, plant and pedestrian access
2.2 Check where personnel working on foot are in close proximity to moving plant
2.3 Conduct site specific risk assessment to ensure hazards have been identified and safety controls in place from traffic management plan

3. Support work activities
3.1 Operate communication devices to support work activities
3.2 Maintain exclusion, no-go and pedestrian zones
3.3 Maintain sight visibility of work being performed
4. Clean up
4.1 Ensure tools and equipment are cleaned, checked, maintained and stored
4.2 Ensure work area is checked, cleaned and tidy

Jan
20
Mon
Articulated Haul Truck Training @ H&I Training Facility
Jan 20 – Jan 22 all-day
Articulated Haul Truck Training @ H&I Training Facility

RIIMPO337E – Conduct Articulated Haul Truck Operations

AH – Belly Dump Truck Training, Certification, VOC assessment and Statement of Attainment (SOA)

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

SkillDescription
ReadingIdentifies and interprets relevant information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare for articulated haul operations
    1.1 Access, interpret and apply conducting articulated dump truck documentation
    1.2 Obtain, interpret, clarify and confirm work requirements
    1.3 Identify hazards and environmental issues, and implement control measures in line with workplace policies
    1.4 Select and wear personal protective equipment required for work activities
    1.5 Access, interpret and apply required geological and survey data to meet work requirements
    1.6 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
  2. Operate articulated haul truck in line with established requirements
    2.1 Carry out prestart and start-up checks in line with workplace procedures
    2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
    2.3 Drive and operate articulated rigid haul truck using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
    2.4 Monitor and manage equipment performance using indicators and alarms
    2.5 Monitor hazards and risks during operations, and ensure safety to self, others, plant and equipment
  3. Load, haul and dump materials to complete work activity
    3.1 Position articulated haul truck under all loading units and load vehicle
    3.2 Carry out approved haulage operations
    3.3 Carry out approved dumping operations
    3.4 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
  4. Conduct housekeeping activities
    4.1 Clear work area in line with workplace procedures
    4.2 Manage and/or report hazards to maintain a safe working environment
    4.3 Complete and file or distribute documentation in a manner that complies with workplace practices
Excavator Training @ H&I Training Facility
Jan 20 – Jan 22 all-day
Excavator Training @ H&I Training Facility

RIIMPO320F – Conduct Civil Construction Excavator Operations

LE – Train to operate Excavator, gain certification, VOC assessment and Statement of Attainment (SOA)

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

SkillDescription
ReadingIdentifies and interprets information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare for excavator operations
    1.1 Access, interpret and apply excavator operations documentation
    1.2 Obtain, interpret, clarify and confirm work requirements
    1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
    1.4 Select and wear personal protective equipment required for work activities
    1.5 Obtain, identify and implement traffic management signage requirements according to standard operating procedures and safe work practices
    1.6 Select required excavator equipment and/or attachments and confirm suitability for work activities
    1.7 Obtain and interpret emergency procedures for excavators, and be prepared for fires, accidents and emergencies
    1.8 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
  2. Operate excavator in line with established requirements
    2.1 Carry out prestart and start-up checks in line with workplace procedures
    2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
    2.3 Drive and operate excavator using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
    2.4 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
    2.5 Monitor and manage equipment performance using indicators and alarms in line with manufacturers’ specifications
  3. Lift, carry and place materials to complete work activity
    3.1 Establish weight of load and ensure it is within safe operational limits of the machine
    3.2 Use lifting gear within safe working load requirements and in line with workplace requirements
    3.3 Position machinery and ensure stable and effective shift of materials according to work requirements
    3.4 Shift load safely and effectively, using hand, audible and communication signal, in line with workplace procedures
    3.5 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
  4. Select, remove, fit and use attachments for a excavator
    4.1 Select attachment for the task
    4.2 Fit attachment in line with workplace procedures
    4.3 Test attachment and ensure correct fitting and operation
    4.4 Use attachment within design limits and in accordance with workplace procedures
    4.5 Remove, clean and store attachments in designated location in line with workplace procedures
  5. Prepare to relocate the excavator
    5.1 Prepare excavator for relocation
    5.2 Move excavator safely within and/or between work areas, observing relevant codes and traffic management requirements
    5.3 Assist loading and unloading machine from float/trailer in line with workplace procedures
  6. Conduct housekeeping activities
    6.1 Clear work area and dispose of or recycle materials according to workplace procedures
    6.2 Manage and/or report hazards to maintain a safe working environment
    6.3 Complete and file or distribute documentation in a manner that complies with workplace practices
Jan
21
Tue
Skid Steer Training @ H&I Training Facility
Jan 21 – Jan 22 all-day
Skid Steer Training @ H&I Training Facility

RIIMPO318F – Conduct Civil Construction Skid Steer Loader Operations

LS

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

SkillDescription
ReadingIdentifies and interprets information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare for skid steer loader operations
    1.1 Access, interpret and apply skid steer loader operations documentation
    1.2 Obtain, interpret, clarify and confirm work requirements
    1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
    1.4 Select and wear personal protective equipment required for work activities
    1.5 Obtain, identify and implement traffic signage requirements according to standard operating procedures and safe work practices
    1.6 Select required skid steer equipment and confirm suitability for work activities
    1.7 Obtain and interpret emergency procedures for skid steers, and be prepared for fires, accidents and emergencies
    1.8 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
  2. Operate skid steer loader in line with established requirements
    2.1 Carry out prestart and start-up checks in line with workplace procedures
    2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
    2.3 Drive and operate loader using techniques suited to equipment capabilities and site work conditions, and according to workplace procedures
    2.4 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
    2.5 Monitor and manage equipment performance using indicators and alarms
  3. Load, carry and place materials to complete work activity
    3.1 Establish weight of load and ensure it is within safe operational limits of the machine
    3.2 Position machinery to ensure stable and effective shift of materials according to work requirements
    3.3 Shift materials safely and effectively, using hand audible and communication signals, in line with workplace procedures
    3.4 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
  4. Select, remove, fit and use attachments for a skid steer loader
    4.1 Select appropriate attachment and required equipment for the task, and in accordance with safe working load requirements
    4.2 Fit attachment in line with workplace procedures
    4.3 Test attachment and ensure correct fitting and operation
    4.4 Use attachment within design limits and in accordance with workplace procedures
    4.5 Remove, clean and store attachments in designated location in line with workplace procedures
  5. Prepare to relocate the skid steer loader
    5.1 Prepare for relocation of skid steer loader
    5.2 Move skid steer loader safely within and/or between work areas, observing relevant codes and traffic management requirements
    5.3 Assist loading and unloading machine from float/trailer in accordance with safe work practices
  6. Conduct housekeeping activities
    6.1 Clear work area and dispose of or recycle materials according to workplace procedures
    6.2 Manage and/or report hazards to maintain a safe working environment
    6.3 Complete and file or distribute documentation in a manner that complies with workplace practices
Jan
22
Wed
Articulated Haul Truck Training @ H&I Training Facility
Jan 22 – Jan 24 all-day
Articulated Haul Truck Training @ H&I Training Facility

RIIMPO337E – Conduct Articulated Haul Truck Operations

AH – Belly Dump Truck Training, Certification, VOC assessment and Statement of Attainment (SOA)

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

SkillDescription
ReadingIdentifies and interprets relevant information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare for articulated haul operations
    1.1 Access, interpret and apply conducting articulated dump truck documentation
    1.2 Obtain, interpret, clarify and confirm work requirements
    1.3 Identify hazards and environmental issues, and implement control measures in line with workplace policies
    1.4 Select and wear personal protective equipment required for work activities
    1.5 Access, interpret and apply required geological and survey data to meet work requirements
    1.6 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
  2. Operate articulated haul truck in line with established requirements
    2.1 Carry out prestart and start-up checks in line with workplace procedures
    2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
    2.3 Drive and operate articulated rigid haul truck using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
    2.4 Monitor and manage equipment performance using indicators and alarms
    2.5 Monitor hazards and risks during operations, and ensure safety to self, others, plant and equipment
  3. Load, haul and dump materials to complete work activity
    3.1 Position articulated haul truck under all loading units and load vehicle
    3.2 Carry out approved haulage operations
    3.3 Carry out approved dumping operations
    3.4 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
  4. Conduct housekeeping activities
    4.1 Clear work area in line with workplace procedures
    4.2 Manage and/or report hazards to maintain a safe working environment
    4.3 Complete and file or distribute documentation in a manner that complies with workplace practices
Wheeled Loader Training @ H&I Training Facility
Jan 22 – Jan 24 all-day
Wheeled Loader Training @ H&I Training Facility

RIIMPO321F – Conduct Civil Construction Wheeled Front End

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

SkillDescription
ReadingIdentifies and interprets information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare for wheeled front end loader operations
    1.1 Access, interpret and apply wheeled front end loader operations documentation
    1.2 Obtain, interpret, clarify and confirm work instructions
    1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
    1.4 Select and wear personal protective equipment required for work activities
    1.5 Obtain, identify and implement traffic management signage requirements according to standard operating procedures and safe work practices
    1.6 Select required wheeled front end loader equipment and confirm suitability for work activities
    1.7 Obtain and interpret emergency procedures for wheeled front end loaders, and be prepared for fires, accidents and emergencies
    1.8 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
  2. Operate front end loader in line with established requirements
    2.1 Carry out prestart and start-up checks in line with workplace procedures
    2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
    2.3 Drive and operate front end loader, and modify the operating technique to meet changing work conditions
    2.4 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
    2.5 Perform work activity within the operating capacity of the equipment
    2.6 Monitor and manage equipment performance using indicators and alarms in accordance with manufacturers’ specifications
  3. Attach, secure, lift, carry and place materials to complete work activity
    3.1 Establish weight of load and ensure it is within safe operational limits of the machine
    3.2 Use lifting gear within safe working load requirements and in line with workplace procedures
    3.3 Position machinery to ensure stable effective shift materials according to work requirements
    3.4 Shift load safely and effectively using hand, audible and communication signal, in line with workplace procedures
    3.5 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
  4. Prepare to relocate the front end loader
    4.1 Prepare front end loader for relocation
    4.2 Move front end loader safely within and/or between work areas, observing relevant codes and traffic management requirements
    4.3 Assist loading and unloading machine from float/trailer in line with workplace procedures
  5. Conduct housekeeping activities
    5.1 Clear work area and dispose of or recycle materials according to workplace procedures
    5.2 Manage and/or report hazards to maintain a safe working environment
    5.3 Complete and file or distribute documentation in a manner that complies with workplace practices
Working Safetly at Heights Training @ H&I Training Facility
Jan 22 all-day
Working Safetly at Heights Training @ H&I Training Facility

RIIWHS204D – Work Safely at Heights

WH

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.

SkillDescription
ReadingIdentifies and interprets information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Identify work requirements
    1.1 Access, interpret and apply height safety procedures and ensure the work activity is compliant
    1.2 Inspect site to determine layout and physical condition, condition of structures, prevailing weather conditions, equipment requirements and potential hazards
    1.3 Adhere to WHS requirements
    1.4 Identify, select and check safety equipment for serviceability
    1.5 Identify, manage and report potential risks and hazards
  2. Identify work procedures and instructions
    2.1 Consult with authorised personnel to select materials, tools and equipment and check for serviceability
    2.2 Select, wear and care for personal protective equipment
    2.3 Inspect/install fall protection and perimeter protection equipment
    2.4 Identify approved methods of moving tools and equipment to work area and minimise potential hazards associated with tools at heights
    2.5 Ensure safety system has been installed correctly
    2.6 Select and install appropriate signs and barricades
  3. Access and install equipment
    3.1 Consult with authorised personnel to ensure anchor fall protection and associated equipment is correctly fitted and adjusted
    3.2 Ensure all required equipment is installed
    3.3 Use recommended methods to access work area for people, tools and equipment
    3.4 Locate tools and materials to eliminate or minimise the risk of items being knocked down
  4. Perform work at heights
    4.1 Check access from ground to work area and ensure it is safe
    4.2 Keep fall equipment in place and adjusted appropriately for movement during work
    4.3 Undertake manual handling of materials and equipment
    4.4 Locate materials and equipment ensuring that they are safely secured and distributed
    4.5 Check safety system periodically for compliance
    4.6 Monitor risk control measures to ensure that they are effective and appropriate
    4.7 Reassess risk control measures, as required, in accordance with changed work practices and/or site conditions and undertake alterations
  5. Clean up work area
    5.1 Consult with authorised personnel to ensure safety system is dismantled and removed
    5.2 Clear work area and dispose of or recycle materials
    5.3 Clean, check, maintain and store tools and equipment
Jan
23
Thu
Roller Training @ H&I Training Facility
Jan 23 – Jan 24 all-day
Roller Training @ H&I Training Facility

RIIMPO317F – Conduct Roller Operations

LR

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

SkillDescription
ReadingIdentifies and interprets information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare roller operations
    1.1 Access, interpret and apply roller operations documentation
    1.2 Obtain, interpret, clarify and confirm work requirements
    1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
    1.4 Select and wear personal protective equipment required for work activities
    1.5 Identify, obtain and implement traffic management signage requirements according to standard operating procedures and safe work practices
    1.6 Select required roller equipment and confirm suitability for work activities
    1.7 Obtain and interpret emergency procedures for rollers, and be prepared for fires, accidents and emergencies
    1.8 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
  2. Operate roller in line with established requirements to complete work activity
    2.1 Carry out prestart and start-up checks in line with workplace procedures
    2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
    2.3 Drive and operate roller using techniques suited to equipment capabilities, site and work conditions, and according workplace procedures
    2.4 Perform work activity within the operating capacity of the equipment
    2.5 Adjust interchangeable drums, spray bars, scraper bars, wheel/drum brooms, drag brooms and blades in line with workplace procedures
    2.6 Engage and disengage the compacting device
    2.7 Identify, remove or manage contaminants in a safe manner incorporating safe work practices
    2.8 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
    2.9 Monitor and manage equipment performance using indicators and alarms
    2.10 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
  3. Prepare to relocate the roller
    3.1 Prepare the roller for relocation
    3.2 Move the machine safely within and/or between work areas, observing relevant codes and traffic management requirements
    3.3 Assist loading and unloading machine from float/trailer in line with workplace procedures
  4. Conduct housekeeping activities
    4.1 Clear work area and dispose or recycle materials according to workplace procedures
    4.2 Manage and/or report hazards to maintain a safe working environment
    4.3 Complete and file or distribute documentation in a manner that complies with workplace practices
Jan
24
Fri
Quick Cut & Road Saw Training – H&I Safety and Training @ H&I Safety and Training Facility
Jan 24 @ 8:00 am – 12:00 pm
Quick Cut & Road Saw Training - H&I Safety and Training @ H&I Safety and Training Facility

RIICRC319D – Saw and Cut Concrete Pavements to initiate planned cracks

QC/RS

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.

SkillDescription
ReadingIdentifies and interprets information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare to saw and cut concrete pavements to initiate planned cracks
    1.1 Access, interpret and apply initiation of planned cracks in concrete pavements documentation and ensure the work activity is compliant
    1.2 Obtain, read, interpret, clarify and confirm work requirements
    1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
    1.4 Select and wear correct personal protective equipment appropriate for work activities
    1.5 Identify, obtain, confirm and implement signage and barrier requirements
    1.6 Select and check for faults to plant, tools and equipment
    1.7 Identify, address and report environmental issues
    1.8 Mark out saw-cuts in accordance with specifications
  2. Select and operate concrete saw
    2.1 Select concrete saw consistent with needs of job and in accordance with standard work practice
    2.2 Check equipment for serviceability and safety, and report faults
    2.3 Identify potential hazards and implement control measures for safe placement of hoses
    2.4 Assess concrete for optimum timing of saw-cut
    2.5 Connect hoses to tool and cover trip hazards
    2.6 Use concrete saw safely and effectively in application processes and ensure correct storage when not in use
    2.7 Saw and cut to correct dimensions
    2.8 Clean out and protect open cut
    2.9 Complete written saw cutting records
    2.10 Monitor movements and hazards and identify and communicate changes to the work environment during the work process
  3. Clean up
    3.1 Clear work area and dispose of, reuse or recycle materials
    3.2 Clean, check, maintain and store machinery, tools and equipment
Jan
27
Mon
Articulated Haul Truck Training @ H&I Training Facility
Jan 27 – Jan 29 all-day
Articulated Haul Truck Training @ H&I Training Facility

RIIMPO337E – Conduct Articulated Haul Truck Operations

AH – Belly Dump Truck Training, Certification, VOC assessment and Statement of Attainment (SOA)

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

SkillDescription
ReadingIdentifies and interprets relevant information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare for articulated haul operations
    1.1 Access, interpret and apply conducting articulated dump truck documentation
    1.2 Obtain, interpret, clarify and confirm work requirements
    1.3 Identify hazards and environmental issues, and implement control measures in line with workplace policies
    1.4 Select and wear personal protective equipment required for work activities
    1.5 Access, interpret and apply required geological and survey data to meet work requirements
    1.6 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
  2. Operate articulated haul truck in line with established requirements
    2.1 Carry out prestart and start-up checks in line with workplace procedures
    2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
    2.3 Drive and operate articulated rigid haul truck using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
    2.4 Monitor and manage equipment performance using indicators and alarms
    2.5 Monitor hazards and risks during operations, and ensure safety to self, others, plant and equipment
  3. Load, haul and dump materials to complete work activity
    3.1 Position articulated haul truck under all loading units and load vehicle
    3.2 Carry out approved haulage operations
    3.3 Carry out approved dumping operations
    3.4 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
  4. Conduct housekeeping activities
    4.1 Clear work area in line with workplace procedures
    4.2 Manage and/or report hazards to maintain a safe working environment
    4.3 Complete and file or distribute documentation in a manner that complies with workplace practices