Roller Training

Roller Training

When:
January 23, 2020 – January 24, 2020 all-day
2020-01-23T00:00:00+11:00
2020-01-25T00:00:00+11:00
Where:
H&I Training Facility
150 Mersey Road Bringelly NSW 2556
Cost:
Contact
Contact:
Nicky
0418 182 542

RIIMPO317F – Conduct Roller Operations

LR

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

SkillDescription
ReadingIdentifies and interprets information from workplace procedures, documentation, legislation and regulations
NumeracyUses equipment operating capacity schedule to confirm safe weight load limits

Course Outline

  1. Plan and prepare roller operations
    1.1 Access, interpret and apply roller operations documentation
    1.2 Obtain, interpret, clarify and confirm work requirements
    1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
    1.4 Select and wear personal protective equipment required for work activities
    1.5 Identify, obtain and implement traffic management signage requirements according to standard operating procedures and safe work practices
    1.6 Select required roller equipment and confirm suitability for work activities
    1.7 Obtain and interpret emergency procedures for rollers, and be prepared for fires, accidents and emergencies
    1.8 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
  2. Operate roller in line with established requirements to complete work activity
    2.1 Carry out prestart and start-up checks in line with workplace procedures
    2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
    2.3 Drive and operate roller using techniques suited to equipment capabilities, site and work conditions, and according workplace procedures
    2.4 Perform work activity within the operating capacity of the equipment
    2.5 Adjust interchangeable drums, spray bars, scraper bars, wheel/drum brooms, drag brooms and blades in line with workplace procedures
    2.6 Engage and disengage the compacting device
    2.7 Identify, remove or manage contaminants in a safe manner incorporating safe work practices
    2.8 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
    2.9 Monitor and manage equipment performance using indicators and alarms
    2.10 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
  3. Prepare to relocate the roller
    3.1 Prepare the roller for relocation
    3.2 Move the machine safely within and/or between work areas, observing relevant codes and traffic management requirements
    3.3 Assist loading and unloading machine from float/trailer in line with workplace procedures
  4. Conduct housekeeping activities
    4.1 Clear work area and dispose or recycle materials according to workplace procedures
    4.2 Manage and/or report hazards to maintain a safe working environment
    4.3 Complete and file or distribute documentation in a manner that complies with workplace practices

Leave a Reply